Binks Conventional Spray Gun Extension Style "HC" 5/8FPT are available with point-of-attachment fittings

are available with point-of-attachment fittings for breathing air compressor systems or ambient air pumps

Air outlet at shutoff valve: 1/4” NPSM (M)

For Job Pro (CA) Aluminum Series pressure washer models:

synthetic rubber compound tube with high tensile strength braid

Binks Conventional Spray Gun Extension Style "HC" 5/8FPT are available with point-of-attachment fittingsUsed to coat the inside diameter of 2" to 24" pipe. Needs to be pressure fed from a pressure tank, pump or pressure cup. 360 degree spray pattern Forward angle, forward angle forward spray, right angle or reverse angle tip (specify when ordering). Fits through a 3 4" clearance hole. Best suited for medium to heavy viscosity materials. Long needle shuts material off at the tip. Useable length of extension is approximately 1 1 2" shorter that extension